Type: Driver
File Name:
File Size: 24.1 MB
17 (4.92)
Downloads: 10
Supported systems: Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10
Price: Free* (*Free Registration Required)

Download Now

Align the pins of the CPU against the pinholes of the Socket Be sure to pay attention to the orientation of the CPU. Figure 3: CPU Socket 4. Push down the CPU into the Socket Push down the release lever and lock it against the key ADLINK BIOS NuPRO-760.

Push down the opposite side of the ZIF clip and hook ADLINK BIOS NuPRO-760. Slide the head of the clip to left and lock it. Connect the cooling fan cable to the socket as shown below. Be careful not to place the cable on the CPU cooling fan. To remove the CPU, lift the releasing lever of the Socket The CPU and the heat radiation plate are hot. They may cause burns.

To remove the CPU, reverse the installation steps. Make sure that good contact is made between the processors and the heat sinks.

Insufficient ADLINK BIOS NuPRO-760, incorrect types of heat sinks, fans, or thermal compound used or improper amount of thermal compound applied on the CPU die can cause the processors to overheat, which may crash the system. Heat Sink Installation 9 Installations 2. DIMM modules are installed by placing the ADLINK BIOS NuPRO-760 firmly into the socket at a degree angle and pressing straight down figure 6 until it fits tightly into the DIMM socket.

Download ADLink Technology Inc. NuPRO series motherboard BIOS - 6A6LIXA9 • Wim's BIOS

Figure 5: To avoid generating static electricity and damaging the DIMM, ground yourself by touching a grounded metal surface or using a ground scrap before you touch the DIMM. Do not touch the connector of the DIMM. Dirt residue may cause a malfunction. A DIMM should be inserted ADLINK BIOS NuPRO-760 the inner socket first. If DIMM ADLINK BIOS NuPRO-760 not go in smoothly, do not force it.


Pull it all the way out and try again. Make sure the DIMM is properly installed and locked by the tabs on both sides of the socket. Removing a DIMM: Lift it out of the socket. Make sure you store the DIMM in an anti-static bag and must be populated the same size and manufactory of memory modules. You can set the jumpers to make the necessary operations. Figure 7: Jumper Connector For any three-pins jumpers Figure 7the jumper setting is when the jumper connects pin 1 and 2. The setting is when pin 2 and 3 are connected and so on. And also, there is a second way of indication — one of the lines surrounding jumpers is thick, which indicates pin NO. To move a jumper from one position to another, use needle-nose pliers or tweezers to pull the pin cap off the pin and ADLINK BIOS NuPRO-760 it to the desired position.

ADLink Technology Inc. NuPRO-760 series motherboard BIOS - 6A6LIXA9

Use the information in the following table to change the jumpers and the DIP switches. On ADLINK BIOS NuPRO-760 Term. On Off Term. Watchdog Timer Setting Select: Use the information in the following table to change the connector. Thank you for select Audio Card, here is the description about how to connect the connector and phone jack to use audio functions. Check the contents of the packing: Audio Card Audio 9-pins round cable 30 Installations 2.


Table for Audio Card Description of Connector: Description of Connector: The modified data will be stored in a battery-backed CMOS, so that data will be retained even when the power is turned off. In general, the information saved in the CMOS RAM will stay unchanged unless there is a configuration change in the system, such as hard ADLINK BIOS NuPRO-760 replacement or a device is added.


ADLINK BIOS NuPRO-760 If this does ADLINK BIOS NuPRO-760 you will need to reconfigure your BIOS settings. Full-Size Intel® Pentium® III processor based SBC with VGA/Fast Ethernet/DOC. Supports all MHz FSB socket based Intel® Pentium® III processor. [Brochure] Embedded Motherboards and Single Board Computers. Full-Size Intel® Pentium® III processor SBC with VGA/Fast Ethernet. Supports all socket based Intel® Pentium® III processor (GHz) and Intel® Celeron® processors. [Brochure] Embedded Motherboards and Single Board Computers.

Other Drivers